The connection will be made by Bluetooth or MicroUSB cable.
●Bluetooth
Press setting at Home screen then touch Bluetooth device. Check Connect to a Bluetooth device.
Power on the foot switch, press Pairing button for more than 1 second.
LED will flashes "blue" meaning the foot switch is pairing mode, looking for GVIDO.
See GVIDO right page down side, FS1-XXXX(foot switch ) appear or press update.
■ If nothing shows up in Available devices, repeat Pairing button for more than 1 second and press Update.
If the foot switch code appears in Available devices, just touch it.
The foot switch code is inside of battery cover.
Finally FS1-XXXX is shown in the Paired devices. The connection is made successfully.
★When is the foot switch disconnected from GVIDO★
Closing GVIDO or Entering sleep mode will make GVIDO disconnect Bluetooth connection with foot switch.
Open the GVIDO and press one of the switch on the foot switch soon after GVIDO connects again with foot switch.
wait for a few seconds to Connected message show up
When the GVIDO is turned off, the Bluetooth connection is also ended. When the GVIDO is turned on, please repeat Bluetooth connection described above.
●USB Connection
Connect short side of cable to GVIDO.
Connect long side of cable to foot switch.
Make sure the connection is successful and the foot switch works all right.